|
|
Design and lay-out of high pressure pumping station.
Václavík, Tomáš ; Franc, Zdeněk (referee) ; Habán, Vladimír (advisor)
The aim of diploma thesis is design and lay-out of high pressure pumping station with plunger pumps for splash of scales from slabs of hot-rolled. Theoretic (introduction) part of this thesis contain description of formation of scales and description of ways how it is possible remove these scales. And this part contains also explication of effect of water jet on solid material. The practical part of diploma thesis is focused on design of pumping station including of dimensioning of machinery. Part of this work is also technical documentation for proposed pumping station and specification of main machines and devices.
|
|
|
Energy storage in Building services systems
Bílek, Martin ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The subject of this thesis is energy storage systems in building services. In the first part the theoretical acquaintance with the nature of energy storage. In the second part has two variants preparation hot water in an apartment building. In the third part of the test solution storage tank of hot water. Development of computational algorithms, comparison of calculation used and the final summary.
|
|
|
Determination of closing valve control moments
Benda, David ; Vosynek, Petr (referee) ; Hnízdil, Milan (advisor)
This bachelor thesis deals with the calculation of the torque on the output shaft of the four-concentric butterfly valves and experimental measurement of this torque on real manufactured valves. At the beginning is carried out a brief research, the purpose describe the basic components of the butterfly valves, its production variants of the offset disc, eventually types of fittings to piping. The main part describes the partial torque occurring on the individual components. Following data from the performer measurement and at the end are compared obtained results.
|
|
|
Pressure loss valves in heating systems
Náglová, Michaela ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theoretical part of the thesis deals with the hydraulics of heating systems. The aim of the project is a design of the heating and hot water preparation system for an apartment building. The building has 6 above-ground floors and 2 underground floors. Two different options of heating systems were designed, comparison and results are presented in the thesis. In the first case the heat source during the winter season and for water heating, where chosen two gas condensing boilers, situated in separated room on the second underground floor. In the second case, each apartment has its own gas condensing boiler. The experimental part of the project deals with measurements of pressure losses in water armatures used in heating systems. The aim of this part is the determination of coefficients of added resistance for uncontrolled elements, which are normally presented as tabular value. In thesis are presented results for a ball valve, backflow preventer, filter, for slide valve and thermostatic valve. Measurements for thermostatic valve where done with different settings and results are compared with parameters listed in the datasheet.
|
|
|
Heating of panel house with alternative preparation of TV
Bílek, Martin ; Adam, Pavel (referee) ; Horák, Petr (advisor)
The subject of this thesis is the heating and hot water preparation in the residential house in Brno. object has eight floors and basement. In each floor there are five residential units. In the basement there is a utility room with heating, gas boiler cascade. Used to heat-pipe heating system. Heating surfaces are plate and tubular body. The primary source of hot water is gas boiler. As a secondary source of alternative preparation with solar home stations. Each apartment has its own solar station.
|
|
|
Fittings of heating systems
Klus, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theme of this diploma thesis is fittings of heating systems and it is divided into three parts. The first part deals with this topic on theoretical level. In the second part, there is a calculations and drawings that deals with heating and water heating of the apartment building in Uherské Hradiště. This part is solved in two variants concerning hydraulic balancing and regulation of the heating system. The last part of the thesis is an experimental solution and processing of pressure loss results of selected valves. These results are compared with the values reported by the manufactures of the valve.
|
|
|
Foundation Design of the Athletics Stadium in Pilsner
Drs, Jakub ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The task of thisbachelor dissertation is to describe the concept of safe and economic foundation of the athletic stadium in Plzeň, the Czech Republic. The concept and assessment are developer on the basis of obtained geotechnical conditions and the load of the construction. The calculations are based upon valid forms and the concept approaches. Furthermore, the thesis focuses on technology and working proces of large diameter bored piles.
|
|
|
Fluid power heating system
Paták, Jiří ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The theoretical part deal with problematic of fluid power heating system. The experimental part deal with measurement of the characteristic of circulation pump and measurement of valves - ball valve. The project solves the heating and hot water preparing for the new administrative building in Žďár nad Sázavou. The building has 3 floors. As a source of heat for the winter season is designed gas boiler, for hot water preparing is also used the same gas boiler. The heat source is placed in a separately accessible room.
|
|
|
Heating of multifunkcional building
Kořenková, Veronika ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The goal of this bachelor thesis is to introduce a heating system solution for multifunctional building. Thesis is divided into theroretical, calculation and project parts. Theoretical part is focused on the definition of fittings in heating systems. Second part depict the proposal of heating system and heat preparation of the multifunctional building, which contains veterinary clinic and housing units. Gas condensing boiler is chosen as a source of heat. The building is heated by steel panel radiators and towel rail radiators. Preparation of hot water is done by two indirect heating water storage tanks. Preheating of water is supported by solar collectors. Project part of the thesis contains technical report and drawing, based on the calculation part.
|
|
|
Condensing boiler and solar collectors in a residential building
Bukovjan, Jiří ; Vendlová, Lucie (referee) ; Horák, Petr (advisor)
The subject of this thesis is the heating and hot water preparation in the residential house in Rožnov pod Radhoštěm. Object has four floors and basement. In each floor there are two residential units. In thebasement there is a utility room with heating, gas boiler cascade. Used to heat-pipe heatingsystem. Heating surfaces are plate and tubular body. The primary source of hot water is gasboiler. As a secondary source of alternative preparation with solar system.
|
guest ::
